Description The white Electro-Voice EVID C8.2HC is a passive 8″ coaxial installation speaker designed to deliver reliable full-range voice and music reproduction in environments with high ceilings. Dual integrated waveguides contribute to the speaker’s 75° coverage pattern. When driven by your 70V, 100V, or 8-Ohm power amplifier (available separately), this two-way speaker provides a continuous power capacity of 75W. Equipped with an 8″ polypropylene woofer and a 1″ titanium-coated tweeter in a ported enclosure, the EVID C8.2HC yields a frequency range of 50 Hz to 20 kHz.An internal 2.6 kHz network ensures bandwidth distribution to the speaker components while protecting against damage from overloading. The integrated multi-tap transformer accommodates a range of taps, selectable via a convenient switch on the ABS baffle. The removable Euroblock connector, tile bridge, backing plate support, cutout template, and paint shield simplify installation.Features8″ two-way coaxial installation speaker for mounting in high-ceiling environmentsDual integrated waveguides help achieve the 75° coverage pattern, which fills the same area installed in a 21′ ceiling as a typical flush-mounted speaker housed in an 8′ ceilingControlled-dispersion, high-output speaker with extended frequency response for optimized reproduction of background music or paging/announcement requirementsWaveguide-coupled, titanium-coated dome tweeter for smooth high-frequency dispersionIntegrated low-loss, line-matching transformer for 70V/100V or 8-Ohm bypass operationFront baffle wattage selector switch allows for easy tap selection without having to access the rear of the speakerFull-bandwidth overload protectionIntegrated ported enclosure for optimized bass responsePerforated grille speaker cover with durable powder-coated enamel finishIncluded tile bridge allows for safe suspension in a drop ceiling that uses mineral wool or other fiber-based ceiling tilesSpecificationsActive or PassivePassiveLF Driver8″ / 20 cm Polypropylene Cone in WaveguideHF Driver1″ / 2.5 cm Titanium-Coated Mylar Dome TweeterFrequency Range50 Hz to 20 kHz (-10 dB)Coverage Pattern75° Nominal above 1 kHzPower CapacityAt 8 Ohms (Continuous Wattage): 75 W At 8 Ohms (Peak Wattage): 300 W At 70/100 V: Up to 60 WMaximum Sound Pressure Level (SPL)Continuous: 112 dB Peak: 118 dBAxial Sensitivity93 dB SPL (1 W / 1 m)Nominal Impedance8 Ohms (Transformer Bypass)Transformer TapsWatts at 70 V: 7.5, 15, 30, or 60 Watts at 100 V: 15, 30, or 60 Bypass: 8 OhmsCrossoverCrossover Frequency: 2.6 kHz Slope: 12 dB/OctaveConstruction MaterialBaffle/Bezel: UL 94V-O Rated ABS Backcan: Zinc-Plated Steel Grille: Perforated Powder-Coated SteelInputsRemovable 4-Pin Euroblock with Screw Terminals and Loop-ThruMaximum Wire Gauge12 AWGSafety RatingUL 1480 UL 2043Cutout Diameter12.7″ / 32.2 cmDimensions12.6 x 11.9″ / 32.0 x 30.3 cmWeight13.2 lb / 6 kgPackaging InfoPackage Weight40.85 lbBox Dimensions (LxWxH)34 x 18 x 17″
